欢迎光临:

昆明利来电缆桥架厂

是湖南昆明地区电缆桥架、玻璃钢桥架、各种母线槽等产品的顶级桥架厂商,利来欢迎各位领导前来考察!
  • 在线联系
  • 微信扫描

加入利来的企业QQ

搜索利来微信公众号:*****

联系利来 contact us
17387187921
电话:
17387187921
地址:
昆明市官渡区东聚建材城东区6幢13号
槽式电缆桥架
您所在的位置:利来首页 > 产品展示 > 槽式电缆桥架 > 正文

邵通利来w66电缆桥架

作者: 来源: 日期:2018-12-23 15:56:53


一、邵通冷利来w66电缆桥架锌层表面应光滑均匀,致密。不得有起皮、气泡、花斑、局部未镀、划伤等缺陷。看上起很整洁二、邵通热利来w66桥架。热利来w66电缆桥架是将除锈后的钢板浸入500℃左右融化的锌液中,利来w66层镀到钢板上的原理,以此来完成防腐的目的,效果比较好,价格也比较贵。 利来w66颗粒均匀分布在利来w66板上,其粗糙程度对喷漆具有很好的附着力,使漆面不易脱落。热喷锌不会对工件造成变型。 因为热喷锌只在工作表面产生瞬间高温,不会至任何工件发生形变,喷涂应平整、光滑、均匀、不起皮、无气泡水泡。  三、邵通喷塑桥架是邵通地区使用最多的一种桥架,因为你价格合适,主要使用在底下车库,房地产行业,使用量大。邵通桥架是讲塑料粉喷涂电缆桥架上的一种表面处理方法。喷塑桥架工艺操作简便,对厂家加工技术要求低,同时价格也便宜;有些施工场合已经明确提出必须使用静电喷塑工艺处理;静电喷粉喷涂过程中不会出现喷漆工艺中常见的流淌现象。

 What are the commonly used surface treatment methods for Shaotong bridge frame?
First, Shaotonglengduxin cable bridge frame zinc surface should be smooth and uniform, dense. No skin, bubbles, spots, partial unplated, scratch and other defects shall be allowed. It looks neat.
Second, Shaotongre galvanized bridge frame. The hot galvanized cable bridge frame is the principle of immersing the derusted steel plate into the melted zinc liquid at about 500
°C and plating the galvanized layer on the steel plate to complete the purpose of corrosion protection. The effect is relatively good and the price is relatively expensive. Zinc plating particles are evenly distributed on the galvanized plate, and their roughness has a good adhesion to spray paint, making the paint surface not easy to fall off. Thermal zinc injection does not cause deformation of the workpiece. Because hot zinc spray only produces instant high temperature on the working surface, it will not be deformed to any workpiece. Spraying should be flat, smooth, uniform, non-skinned, and without bubble blisters.
Third, Shaotong is the most used bridge frame in the Shaotong area, because your price is suitable, mainly used in the bottom garage, real estate industry, the use of large. Shaotong bridge frame is a surface treatment method on plastic powder spraying cable bridge frame. Spraying bridge frame technology is easy to operate, low requirements for the manufacturer's processing technology, while the price is also cheap; In some construction situations, it has been clearly stated that electrostatic injection molding technology must be used; In the process of electrostatic powder spraying, there will be no common flow phenomenon in the spray painting process.

 

 

 

 

联系利来 contact us
 
手机:
17387187921
 
微信:
17387187921
 
邮箱:
3303609113@qq.com

联系利来

Contact Us

电话:+86-17387187921
地址:昆明市官渡区东聚建材城东区6幢13号